Concrete for a 10-inch Sonotube

A 10-inch round tube holds 0.545 ft³ of concrete per foot of depth. A 4 ft tube takes 4 bags of 80-lb mix or 6 bags of 60-lb mix, with 10% extra.

What are you pouring?
Units

Round column or Sonotube

Use the inside diameter of the tube; height is the full depth of concrete.

Bag size
Add your prices (optional)

Use your supplier's prices. We don't show average prices because they vary too much by area.

Concrete needed

2.40 cubic feet

0.089 yd³ · 0.068 m³ · includes 10% extra

You need about 2.40 cubic feet of concrete, or 4 bags of 80 lb mix.

Bags of premix

  • 840 lb bags
  • 750 lb bags
  • 660 lb bags
  • 480 lb bags
  • Before extra0.08 yd³ (2.2 ft³)
  • Weight of bags320 lb
  • Ready-mix costAdd a price per yd³
  • Bagged costAdd a price per bag

One 80 lb bag makes about 0.60 ft³ (manufacturer's published yield). Bags are rounded up.

Bagged mix makes sense at 0.09 yd³. A ready-mix truck for a load this small would usually come with a minimum-order or short-load charge.

Estimate only, not a quote or engineering advice. Disclaimer

A 10-inch tube is a frequent choice for deck footings and porch posts where 8 inches is a little small.

Bags per 10-inch tube by depth

One 10-inch tube, 10% extra included in the bag counts
Depthft³ exact80-lb bags60-lb bags50-lb bags
2 ft1.09234
3 ft1.64345
4 ft2.18467
5 ft2.73578
6 ft3.276810

The math

π × (10 ÷ 24)² = 0.5454 ft³ per foot · × depth (ft) ÷ bag yield

For several tubes, set the number of columns in the calculator: it totals the volume before rounding, which can save a bag or two over multiplying the per-tube count. If the tube sits on a wider footing pad, add that as a separate footing.

Planning all the piers of a deck? Measure each tube's depth: when the ground slopes, the tubes on the low side are taller and need more concrete.

Frequently asked questions

How many bags of concrete for a 10-inch Sonotube?

Each foot of a 10-inch tube holds 0.545 ft³. A 4 ft tube takes 2.18 ft³: 4 bags of 80-lb or 6 bags of 60-lb mix, including 10% extra.

How many cubic feet in a 10-inch Sonotube?

0.545 cubic feet per foot of length. Multiply by the depth in feet.

How much concrete for a 10-inch Sonotube 3 feet deep?

1.64 ft³, which is 3 bags of 80-lb or 4 bags of 60-lb mix with 10% extra.

Other tube sizes

Related

Sources